Delta RMC151 - Manual (Page 33)

Appendix A: Wiring
SSI Transducer Wiring
For Synchronous Serial Interface (SSI) transducers and encoders.
If the SSI transducer is linear, make sure to choose the synchronized
type.
Input
Connector
Clock+
Clock-
Data+
Data-
Power Supply
+Pwr Cmn
Clk+
Clk-
Cmn
Dat+
Dat-
Case
Pwr+
DC Ground
Tip: See next page for manufacturer-specific wiring diagrams.
Universal I/O Module:
The Universal I/O SSI input wiring is identical to the diagram shown
above, with the exception of the pin order. For details, see the
UI/O Module Wiring topic in the RMCTools help.
Notes:
• The user must supply power to the transducer.
• Do NOT connect the transducer ground or common to the shield,
case, or protective earth ground
deltamotion.com 31