Delta RMC151 - Manual (Page 11)

Step 5: Start a New Project
Set Up Universal I/O Channels
If your RMC includes a Universal I/O module, you must first set up the
high-speed channels before using them as part of an axis.
1. In the Project pane, expand the Modules folder and double-click
the UI/O module.
2. On the Quad/SSI page, choose the desired Mode for each
channel. Typically, this will be Quadrature Input or SSI Axis Input.
For more details, refer to the UI/O module topic in the RMCTools
help.
Saving Settings
Throughout the startup procedure, make sure to save the
configuration changes you make or they may be lost!
1. Save RMCTools Project
On the File menu, click Save.
2. Update Flash
On the Controller menu, click Update Flash.
IF YOU DO NOT UPDATE FLASH, CHANGES TO THE
RMC WILL BE LOST WHEN POWER IS REMOVED!
3. Repeat Often
Make sure to save often to prevent loss of data.
deltamotion.com 9