Bonaire Touchpad - Manual (Page 33)

M ULTI -A PPLIANCE T OUCH P AD
Ducted Evaporative Air Conditioning
Step 8 Adjust the output using the arrows and
press ENTER
Default Setup Evaporative Air Conditioning
Program
Step 9 Program the second period using steps
4 to 8.
Period ON/OFF Start Time Mode
Step 10 If only 2 program periods are required
press FINISH. If a 3
rd period is required
program using Steps 4 to 8.
1 ON 6:00 am THERM
2 OFF 9:00 am -
Step 11 If Only 3 Program Periods Are Required
press FINISH. If a 4
th period is required
program using Steps 4 to 8.
3 ON 4:00 pm THERM
4 OFF 10:00 pm - Program setup is now complete and all
functions are resumed.
Step 12 To execute the program, touch the mode
area and select PRGM.
C LOCK S ETUP
The CLOCK setup will take you through the steps to
set the day and time.
Step 1
To select the CLOCK setup touch anywhere
in the SETUP outline.
Step 2 Press CLOCK. The 3 icons will disappear
and edit mode has begun.
Step 3 Three new icons will now be displayed
ENTER, CANCEL & FINISH.
ENTER will save each step of the
program
•
•
•
CANCEL will abort the setup and no
entries will be saved.
FINISH allows you to stop at any time
and save the settings.
Step 4 Adjust the hours using the
arrows. Press ENTER
Step 5 Adjust the minutes using the
arrows. Press ENTER.
Step 6 Adjust the day using the
arrows. Press ENTER.
Time setup is now complete and all functions are resumed.
Bonaire Control Systems Page 33