Dialogue Tech NANO-PV-D510A - Manual (Page 95)

NANO-PV-D510A User Manual
Page 81
NOTE:
PWM functions are supported only when using a 4-pin fan. When
using a 3-pin fan, the PWM functions are not supported.
CPU Temp. Highest Limit [050]
WARNING:
CPU failure can result if this value is set too high
The fan will turn off if the temperature falls below this value.
Minimum Value: 0°C
Maximum Value: 127°C
CPU Temp. Second Limit [040]
WARNING:
CPU failure can result if this value is set too high
When the fan is off, it will only start when the temperature exceeds this setting.
Minimum Value: 0°C
Maximum Value: 127°C
CPU Temp. Third Limit [030]
WARNING:
CPU failure can result if this value is set too high