Dialogue Tech NANO-PV-D510A - Manual (Page 137)

NANO-PV-D510A User Manual
Page 123
NOTE:
Use the following commands to check if the partitions were created
successfully.
Step 7: Press any key to exit the recovery tool and automatically reboot the system.
Please continue to the following procedure: Build-up Recovery Partition. S te p 0 :
B.2.3 Install Operating System, Drivers and Applications
Install the operating system onto the unlabelled partition. The partition labeled as
"Recovery" is for use by the system recovery tool and should not be used for installing the
operating system or any applications.
NOTE:
The operating system installation program may offer to reformat the
chosen partition. DO NOT format the partition again. The partition has
already been formatted and is ready for installing the new operating
system.
To install the operating system, insert the operating system installation CD into the optical
drive. Restart the computer and follow the installation instructions.
B.2.4 Build-up Recovery Partition
Step 1: Put the recover CD in the optical drive.