Dialogue Tech NANO-PV-D510A - Manual (Page 57)

NANO-PV-D510A User Manual
Page 43
Description Label Type
AT/ATX power select J_AUTOPWR1 2-pin header
AT/ATX power select J_ATXCTL1 3-pin header
CompactFlash® card setup JCF1 3-pin header
Clear CMOS J_CMOS1 3-pin header
PCI-104 voltage setup JP1 3-pin header
LVDS voltage selection J_VLVDS1 3-pin header
LVDS panel resolution select J_LCD_TYPE1 3-pin header
COM3 function select J1 3-pin header
Table 4-1: Jumpers
4.4.1 AT/ATX Power Select Jumper Settings
Jumper Label: J_AUTOPWR1
Jumper Type: 2-pin header
Jumper Settings: See Table 4-2
Jumper Location: See Figure 4-3
The AT Power Select jumper specifies the systems power mode as AT or ATX.
Setting Description
Short Use AT power
Open Use ATX power
Table 4-2: AT/ATX Power Select Jumper Settings
Figure 4-3: AT/ATX Power Select Jumper Settings