Dialogue Tech NANO-PV-D510A - Manual (Page 54)

NANO-PV-D510A User Manual
Page 40
4.3 Memory Installation
WARNING:
Do not run the CPU without a heatsink and fan. Without the heatsink
and fan, the high temperatures can destroy the CPU and other
components. CPUs marked as fanless don't need the fan, but still need
adequate ventilation.
The CPU, CPU cooling kit and DIMM are the most critical components of the
NANO-PV-D510A. If one of these component is not installed the NANO-PV-D510A cannot
run.
4.3.1 CompactFlash® Installation
NOTE:
Both CompactFlash® Type I and Type II cards are supported.
To install the CompactFlash® card, please follow the steps below.
Step 1: Locate the CF card socket. Locate the CompactFlash® slot.
Step 2: Align the CF card. Align the CompactFlash® card. The label side should be
facing away from the board. The grooves on the CompactFlash® slot ensure
that the card cannot be inserted the wrong way.
Step 3: Insert the CF card. Push until the CompactFlash® card is firmly seated in the
slot. See Figure 4-1. Step 3: