4 com 3 function select jumper, 5 compactflash® card setup, Figure 4-5: clear bios jumper location – Dialogue Tech NANO-PV-D510A User Manual

Page 59: Figure 4-6: com 3 function select jumper location, Table 4-5: com 3 function select jumper settings

NANO-PV-D510A User Manual

Page 45

Figure 4-5: Clear BIOS Jumper Location

4.4.4 COM 3 Function Select Jumper

Jumper Label:

Jumper Type:

3-pin header

Jumper Settings:

See Table 4-5

Jumper Location:

See Figure 4-6

The COM 3 Function Select jumper sets the communication protocol used by the third

serial communications port (COM 3) as RS-232, RS-422/RS-485. The COM 3 Function

Select settings are shown in the table below.

Setting Description

Short 1-2

RS-232

Short 2-3

RS-422/RS-485

Table 4-5: COM 3 Function Select Jumper Settings

Figure 4-6: COM 3 Function Select Jumper Location

4.4.5 CompactFlash® Card Setup

Jumper Label:

JCF1

Jumper Type:

2-pin header

Jumper Settings:

See Table 4-6

Jumper Location:

See Figure 4-7