Dialogue Tech NANO-PV-D510A - Manual (Page 74)

NANO-PV-D510A User Manual
Page 60
Figure 4-20: VGA Connector
Step 6: Secure the connector. Secure the DB-15 VGA connector from the VGA
monitor to the external interface by tightening the two retention screws on either
side of the connector. Step 0:
4.8 Software Installation
All the drivers for the NANO-PV-D510A are on the CD that came with the system. To
install the drivers, please follow the steps below.
Step 1: Insert the CD into a CD drive connected to the system.
NOTE:
If the installation program doesn't start automatically:
Click "Start->My Computer->CD Drive->autorun.exe"
Step 2: The driver main menu appears (Figure 4-21).