Dialogue Tech NANO-PV-D510A - Manual (Page 63)

NANO-PV-D510A User Manual
Page 49
Figure 4-10: PCI-104 Voltage Jumper Location
4.5 Chassis Installation
4.5.1 Airflow
WARNING:
Airflow is critical for keeping components within recommended
operating temperatures. The chassis should have fans and vents as
necessary to keep things cool.
The NANO-PV-D510A must be installed in a chassis with ventilation holes on the sides
allowing airflow to travel through the heat sink surface. In a system with an individual
power supply unit, the cooling fan of a power supply can also help generate airflow
through the board surface.
4.5.2 Motherboard Installation
To install the NANO-PV-D510A motherboard into the chassis please refer to the reference
material that came with the chassis.
4.6 Internal Peripheral Device Connections
This section outlines the installation of peripheral devices to the onboard connectors.