Dialogue Tech NANO-PV-D510A - Manual (Page 147)

NANO-PV-D510A User Manual
Page 133
Step 7: The recovery tool menu appears. (Figure B-22)
Figure B-22: Recovery Tool Menu
Step 8: Create a factory default image. Follow Step 2 ~ Step 12 described in Section
B.2.5 to create a factory default image. S te p 8 :
B.4 Recovery Tool Functions
After completing the initial setup procedures as described above, users can access the
recovery tool by pressing <F3> while booting up the system. The main menu of the
recovery tool is shown below.
Formatted: Bullet