Dialogue Tech NANO-PV-D510A - Manual (Page 73)

NANO-PV-D510A User Manual
Page 59
Figure 4-19: USB Connector
4.7.5 VGA Monitor Connection
The NANO-PV-D510A has a single female DB-15 connector on the external peripheral
interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect
a monitor to the NANO-PV-D510A, please follow the instructions below.
Step 3: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
Step 4: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 5: Insert the VGA connector. Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
NANO-PV-D510A. See
6
Figure 4-20.