Dialogue Tech NANO-PV-D510A - Manual (Page 100)

NANO-PV-D510A User Manual
Page 86
Boot Loader Redirection is active during POST and during Boot
Loader
Always D EFAULT Redirection is always active (Some OSes may not
work if set to Always)
Terminal Type [ANSI]
Use the Terminal Type BIOS option to specify the remote terminal type.
ANSI D EFAULT The target terminal type is ANSI
VT100 The target terminal type is VT100
VT-UTF8 The target terminal type is VT-UTF8
VT-UTF8 Combo Key Support [Disabled]
Use the VT-UFT8 Combo Key Support option to enable additional keys that are not
provided by VT100 for the PC 101 keyboard.
The VT100 Terminal Definition is the standard convention used to configure and conduct
emergency management tasks with UNIX-based servers. VT100 does not support all keys
on the standard PC 101-key layout, however. The VT-UTF8 convention makes available
additional keys that are not provided by VT100 for the PC 101 keyboard.
Disabled D EFAULT Disables the VT-UTF8 terminal keys
Enabled Enables the VT-UTF8 combination key. Support for
ANSI/VT100 terminals
5.3.6 Power Configuration
The Power Configuration menu (BIOS Menu 9) configures the Advanced Configuration
and AT/ATX Power and Power Interface (ACPI) options.