D-Link DFE-2600 - Manual (Page 96)

Dual-Speed Stackable Hub Web-based Management User’s Guide
Web-based Network Management 84
♦
Port Type This is a is UTP port which supports both UTP and STP
cabling.
♦
Link Status Indicates whether the port is online and working (link up)
or not (link down).
♦
Auto Partition Status Indicates whether the port has been
auto-partitioned and taken offline or not.
♦
Speed Indicates the port speed: 100Mbps or 10Mbps.
♦
Polarity Status Indicates the polarity status: normal or reversed.
♦
Link Test Function State Indicates whether the port link-test is en-
abled or disabled. If enabled, the port will check for link pulses, and
will only transmit if there is a good link to another station.
♦
Administration State Indicates the port partition status, either en-
abled or disabled.
♦
Port Speed State Indicates how the port speed is set: Auto-
Negotiation (NWay enabled), 10Mbps, or 100Mbps.