D-Link DFE-2600 - Manual (Page 100)

Dual-Speed Stackable Hub Web-based Management User’s Guide
Web-based Network Management 88
♦
Protocol This is the protocol used by the Hub for out-of-band (dial-up)
management.
♦
System Restart Out-of-Band Baud Rate This sets the baud rate (cps)
on the Hub.
♦
Out-of-Band Dial Up Phone Number Administrator can place num-
ber here for reference.
Module Port (Slots 1&2) Configuration
When slots 1 or 2 are occupied by either a DFE-260FX Fiber Optic Module
(shown on the graphic representation of the hub as SwFx) or a DFE-260TX
Fast Ethernet Module (SwTp), clicking on the words SwFx or SwTp causes
the following configuration screen to be shown.
Information displayed includes:
♦
Port Type This item shows either Sw-Tx for a Fast Ethernet module
or Sw-Fiber for the Fiber Optic module.
♦
Link Status Indicates link status: online and running (link up) or not
(link down).
♦
Speed Indicates the port speed: 100Mbps or 10Mbps.