D-Link DFE-2600 - Manual (Page 62)

Dual-Speed Stackable Hubs User’s Guide
Master Hub Setup and Management 50
requests, allowing them to be used for network management purposes. Each
of these fields is restricted to 64 characters:
♦
System Name. This parameter corresponds to the MIB-II object
sysName, and is used to assign a name to the hub for administrative
purposes. The hub
domain name is often used, provided a name has
been assigned.
♦
System Location. This parameter corresponds to the MIB-II object
sysLocation, and is used to indicate the physical location of the hub
for administrative purposes.
♦
System Contact. This parameter corresponds to the MIB-II object
sysContact, and is used to note the name and contact information of
the person responsible for administering the hub.
♦
Display Timeout. An additional setting, the console time-out, may be
used to automatically log out the console interface after a predetermined
period of inactivity. This feature increases hub security by preventing ac-
cess to the hub after the interface has been inadvertently left logged on. A
setting of 0 disables this feature.
DFE-2600 Stackable Hub - System Configuration Menu
Mgmt Hardware Revision: Rev. 01
Boot PROM Firmware Version: Ver. 2.22
Software Version:
Ver. 2.04
MAC Address: 0080C80D308C
System Description:
D-Link Corp. DFE-2600 Dual Speed Stackable Hub SNMP/
System Name [ ]
System Location [ ]
System Contact [ ]
Console/Telnet Display Timeout in Minutes [60 ]
HELP SAVE EXIT