D-Link DFE-2600 - Manual (Page 90)

Dual-Speed Stackable Hub Web-based Management User’s Guide
Web-based Network Management 78
The fields are described as follows:
♦
Software Update Mode Set to either network or out-of-band . Deter-
mines whether the configuration file should be obtained through the
Ethernet network or through the console port.
♦
Software Update Control Determines whether or not the Hub should
download its configuration file the next time the Hub is booted.
♦
Boot File The path and configuration file name on the TFTP server. If
you are using bootp-tftp mode, or if Get IP From BOOTP Server is en-
abled, the pathname will be obtained from the BOOTP server.
♦
Boot Server Address The IP address of the TFTP server where the
configuration file is located.
♦
Boot Protocol Set to either bootp-tftp or tftp only. Applies only if the
Software Update Control is enabled.
♦
Get IP From Bootp Server If enabled, the IP address will be obtained
from the BOOTP server.