D-Link DFE-2600 - Manual (Page 64)

Dual-Speed Stackable Hubs User’s Guide
Master Hub Setup and Management 52
♦
Status. This determines whether this trap entry is valid or invalid.
You can delete an entry by changing its status to Invalid.
SNMP Security (Community Names)
SNMP (version 1) implements a rudimentary form of security by requiring
that each request include a community name. A community name is an arbi-
trary string of characters used as a
assword” to control access to the hub.
If the hub receives a request with a community name it does not recognize, it
will trigger an authentication trap, provided this feature has not been dis-
abled.
The DFE-2600 series master hubs allow up to four different community
names to be defined, and the access rights for each community can be sepa-
rately set to either read only or read/write. The status for each string can be
toggled to either valid or invalid. The community names public and private
are defined by default; you can change these names in addition to adding
others. You will need to coordinate these names with the community name
settings you use in your network management system.
DFE-2600 Stackable Hub - SNMP Manager Setting Menu
SNMP Community String Access Right Status
[public ] >
[private ] >
[ ]
[ ]
HELP SAVE EXIT