Ask Proxima DP5600 - Manual (Page 37)

c
PC ADJUSTMENT
This projector can automatically detect most display signals in most personal computers currently distributed.
However, some computers employ a special signal format which is different from the standard ones and may not be
detected by this projector. If this happens, the projector cannot reproduce a proper image, often recognized as a
flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture.
To project a proper image for those non-standard formats, this projector provides PC ADJUSTMENT, in which you
can precisely adjust several parameters to match the input signal format. The projector has eight independent
memory areas that you can store the parameter settings you have made. Therefore, you can recall the setting for a
specific computer when you need it.
:)
This adjustment is available only with the REMOTE CONTROL UNIT.
1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box
will appear.
2. Move the arrow by pressing the POINT BUTTON(UP/DOWN) to select
the SETTING. Press the REAR CLICK BUTTON. Another dialog box,
SETTING DISPLAY, will appear.
3. Then, move the arrow by pressing the POINT BUTTON(UP/DOWN) to
select the PC ADJUSTMENT. Press the REAR CLICK BUTTON.
Another dialog box ’’WHERE TO RESERVE”, will appear.
4. In this dialog box, you will select one of the memory areas shown as
”MODE1” to ’’MODES”. If the parameters have been previously set and
stored to the memory, the status ’’STORED” will appear on a
corresponding row. If not, ’’FREE” will appear.
5. Move the arrow to one of the ’’MODEs” that you want to modify or store
by pressing the POINT BUTTON(UP/DOWN). Press the REAR CLICK
BUTTON to select it.
MAIN MENU DISPLAY
SYSTEM
IMAGE
SCREEN
SETTING
LANGUAGE
►
►
►
►
►
QUIT
SETTING DISPLAY
AUTO RETRACT
REVERSE SCAN T/B
REVERSE SCAN L/R
BLUEBACK
DISPLAY
QUIT
PC ADJUSTMENT
WHERETO RESERVE
MODE 1
MODE 2
MODE 3
MODE 4
MODE 5
MODE 6
MODE 7
MODE 8
STORED
FREE
FREE
FREE
FREE
FREE
FREE
FREE
QUIT
►
►
►
►
►
►
►
►
37
-