Remote control battery installation, Using the remote control unit – Ask Proxima DP5600 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
REMOTE CONTROL BATTERY INSTALLATION!
2
Slide the batteries into the
compartment.
Note: For correct polarity (+ and -
terminal), be sure the battery
terminals are in contact with
the pins in the compartment.
USING THE REMOTE CONTROL UNIT
Point the remote control toward the projector (Receiver window) whenever pressing the buttons. Maximum operating
range for the remote control is about 16.4’ (5m) and 60 ° front and back of the projector.
To insure safe operation, please observe the following precautions:
Use (2) AA type manganese or alkaline batteries.
Change two batteries at the same time.
Do not use a new battery with a used battery.
Avoid contact with water.
Do not drop the remote control unit.
If batteries have leaked on the remote control, carefully wipe the case
clean and load new batteries.
•21