Ask Proxima DP5600 - Manual (Page 35)

c
OTHER FUNCTION SETTING
This projector has other function settings; auto retract, reverse scan T/B, reverse scan L/R, biue back, dispiay and PC
adjustment.
AUTO RETRACT
When this function is in the ”ON” position, the projector retracts the lens when the projector is turned off using the
POWER (LAMP) ON/OFF button. To protect the lens from being damaged while you are carrying the projector, you
are strongly recommended to set this function ”ON”. Since the lens is puiled in each time the POWER is switched off,
you need to make ZOOM and FOCUS adjustments when you turn on the projector.
When this function is in the ’’BOTTOM” position, the
top/bottom picture invert capability lets you project from a
ceiling-mounted projector.
T/B
1\B
REVERSE SCAN L/R
When this function is in the ’’RIGHT” position, the
left/right picture reverse capability lets you project onto a
rear projection screen.
L/R R\J
BLUE BACK
When this function is in the ”ON” position, the projector will project a blue image without video noise on the screen
when the video source is unplugged or turned off.
DISPLAY
When this function is in the ”ON” position, on-screen displays always appear when adjustments are made. Although
these on-screen displays are very helpful, these may spoil the view if adjustments are made during presentations. To
avoid this, you can keep back certain displays by switching this function ’’OFF”. The followings are the displays that
you can hide.
• Wait Display
• Volume Display.
• Color System Dispiay.
• Zoom and Focus Display when remote control unit is used.
• Normal Display
PC ADJUSTMENT
This is a special function that may be used when a computer image is not reproduced properly. This item appears
only when the projector is in COMPUTER MODE and the MENU is activated by the REMOTE CONTROL UNIT. (See
the pages 37 ~ 38 for more detail.)
—
35
-