Ask Proxima Ultralight LS1 - Manual (Page 41)

MODE FREE
MODE FREE funct)on is provided to confirm or dear the parameter data produced by PC ADJUST (Refer to
Pages 36 > 38).
1. Press MENU button and MAIN MENU DISPLAY dialog box will appear.
2. Press POINT LEFT/RIGHT button(s) to select PC ADJUST and press SELECT button. Another dialog box
■Where to reserve* will appear.
3. Press POINT DOWN button ar>d a red arrow will appear.
4. Move the arrow to one of the 'Modes* (Stored position) that you want to confirm by pressing POlt^* UP/DOWN
button(s). Press SELECT button. Another dialog box *PC ADJUSTMENT DISPLAY* wil appear.
5. To quit ^ Adjustment Menu, point to Quit and then press SELECT button.
6. To modify the parameter data, perform the steps 9 * 24 of PC ADJUSTMENT SECTION on pages 37.38.
7. To dear the parameter data, move the arrow by pressing POINT UP/DOWN button(s) to select Mode free.
Press SELECT button. *OK?’ Is displayed (or confirmation.
8. Move the arrow to Yes and then press SELECT button to clear the parameter data.
9. To quit PC Adjustmer>t Menu, move the arrow to Quit ar>d then press SELECT button.
MAIN MENU DISPLAY
1
Ф»
— 39 —