Ask Proxima Ultralight LS1 - Manual (Page 40)

17. Another dialog box *PC ADJUSTMENT DISPLAY 2' will appear and the parameter data for the Me
have selected is shown in this dialog box.
18. Move the arrow to an item that you want to ad|ust by pressing POINT UPiDOWN button(s).
19. To increase the level, point the arrow to A and then press SELECT button. To decrease the lev^' o>
arrow to T artd then press SELECT button.
20. If you want to store the settings in the memory, move the arrow to Stored and press SELECT bu..w.
you have stored the settings, 'OK T is displayed (or confirmation. Move the arrow to Yes and ther
SELECT button.
21. To recall the parameter data before setBngs, move the arrow to Reset and then press SELECT button,
you have reset the settings. *OK T is displayed for confirmabon. Move the arrow to Yes and then
SELECT button. You can a^ust the settings again if needed.
22. To quit PC Adjustment Menu, move the arrow to Quit and then press SELECT button.
23. If you quit PC Adjustment Menu without storing the settings in the memory, the parameter data you ch
Will not be kept.
24. The stored settings are permanently held even if POWER ON/OFF is switched off.
ITEM FUNCTION
CLAMP Adjustment of the clamp level. When the image has a dark bar. try this adjustment.
HEIGHT
Expanding or compressing level tor the vertcal direebon.
WIDTH
Expanding or compressing level for the horizontal direebon.
— 38 —