Ask Proxima Ultralight LS1 - Manual (Page 37)

1. Press MENU button and MAIN MENU DISPLAY dialog box will appear.
2. Press POINT LEFTyHiGHT button(s) to select POSITION and press SELECT button. Another dialog box
POSITION SETTING DISPLAY will appear.
3. Press POINT DOWN button and a red arrow win appear.
4. Move the arrow to a desirable direction ( « - . > * . t or i ) by pressing POINT LEFT/RIGHTyUP/D^iiVN
button(s) and press SELECT button to a desirable picture position.
5. You may want to store the settings to the memory so that you can recall them later. To store the settings,
move the arrow to Stored and then press SELECT button. When you have stored the settings. 'OK 7* Is
displayed for confirmation.
6. Move the arrow to Yes and then press SELECT button. The stored settmgs are permanentty held even if
POWER ON/OPF is switched off.
7. To quit Picture Position Adjustment Menu, move the arrow to Quit and then press SELECT button.
8. tf you do not want to store the settings, move the arrow to Quit and then press SELECT button. The settings
changed remains effective until POWER ONЮFF switch is turned off.
9. To recall the settings from the memory that you have stored, move the arrow to Reset and then press
SELECT button. When you have reset the settings. *OK V is displayed for confirmation. Move the arrow to
Yes and then press SELJECT button. You can erTfust the settings again rf needed.
PICTURE POSITION ADJUSTMENT (COMPUTER MODE)
J
V«j#0
MAIN MENU DISPLAY
PosmoN
о
POSITION SETTING
DISPLAY
— 35 —