Ask Proxima Ultralight LS1 - Manual (Page 31)

This projector ts compatiMe with the four ma^or broadcast video standards: PAL SECAM. NTSC or NTSC 4.43
(COLOR SYSTEMS). It automatically adjusts itself to optimize its performance (or the incoming video. However, if
the video signal is not strong enough to detect the video format the projector may not reproduce the proper video
image. In case this happens, this projector allows you to choose a specific broadcast signal format.
1. Connect the video eouipment and the projector, and turn them on.
2. Set MODE SELECT to -VIDEO MODE*.
3. Press MENU button and MAIN MENU DISPLAY dialog box will appear.
4. Press POINT LEFT/RIGHT'button(s) to select SYSTEM artd press SELECT button. Arx>ther dialog box
COLOR SYSTEM DISPLAY will appear. The current COLOR SYSTEM ts displayed in the system window.
5. Press POINT DOWN button and a red arrow wiR appear.
6. To change the current COLOR SYSTEM, press POINT UP/DOWN button(s) to move the arrow to a desirable
system and then press SELECT button.
7. The new setting remained effective until POWER ON/OFF switch is turned off.
COLOR SYSTEM SELECT (VIDEO MOD0
C«nouar .Vfajaa:
"rrTD
MAIN MENU DISPLAY
NTSC 7ei|p
■50^ -ii) i;
AOtOC..
Btt£-
secAM
NtSCn
I NTSC4.43
COLOR SYSTEM
DISPLAY
1
-29 —