Ask Proxima Ultralight LS1 - Manual (Page 38)

PC ADJUSTMENT
This projector can automaacalty detect display signals from most personal computers currently distrit
However, some computers employ special signal formats which are different from the standard oner
not be detected by this projector. If this happens, the protector cannot reproduce a proper image and
is recognized as a flfckenng picture, a rwn*$ynchronized picture, a non-centered picture or a skewed pictui«
This projector has PC ADJUSTMENT funcbon, to ertable you to prectsefy adjust several parameters to n
with the input signal format The projector has eight independent memory areas where you can storr
parameter you have set This enables you to recall the settir>g for a specific computer whenever you need it
1. Press MENU button and MAIN MENU DISPLAY dialog box will appear.
2. Press POINT LEFT/RIGHT button(s) to select PC ADJUST and press SELECT button. Another dialog
*Where to reserve* wil appear.
3. In this dialog box. you wül select one of the memory areas from among 'Mode 1* to 'Mode 8*. If paramr
have been previously set and stored in the memory, the status 'Stored* wil appear on the corresponding
If not 'Free* wil appear.
4. Press POINT DOWN button and a red arrow will appear.
5. Move the arrow to one of the 'Modes* (Free position) where you want to store the parameters by pressing
POINT UP/DOWN buttoo(s). Press SELECT button to select it
NOTE: If *Stored* appears in all Modes, no new PC parameter data can be stored. In this case, clear the
parameter data using Mode free Function (refer to Page 39).
Continued to the next page.
MAIN MENU DISPLAY