Ask Proxima Ultralight LS1 - Manual (Page 36)

Picture adjustments have been preset at the factory. If you want to chartge the setting, follow the ins
be lows.
1. Press MENU button and MAIN MENU DISPLAY dialog box will appear.
2. Press POINT 1ЕГГ/Я1СНТ button(s) to select IMAGE and press SELECT button. Another dial^ 4 «.
ADJUST DISPLAY win appear. This shows the current picture settings.
3. In this dialog box. you can adjust the settings by increasing or decreasing the levels shown as numb
items and the range of the levels that you can adjust are summarized in the table as below.
4. Press POINT DOWN button and a red arrow w/ill appear.
5. Move the arrow to an item that you want to adjust by pressing POINT UP/DOWN button(s).
6 . To increase the level, poim the arrow to ▲ and then press SELECT button. To decrease the level, t
arrow to T and then press SELECT button.
7. You may want to store the setOngs in the memory $0 that you can recall them later. To store the setting
the arrow to Stored and then press SELECT button. When you have stored the settings. *OK ?' is dlspL
confirmation.
8. Move the arrow to Yes and then press SELECT button. The stored seffirtgs are permanently held
POWER ON/OFF is switched off.
9. To quit Picture image Adjustment Menu, move the arrow to Ouit and then press SELECT button.
10. If you do not want to store the settings, move the arrow to Quit and then press SELECT button. The:
changed remains effective until POWER ONЮFF switch is turned off.
11. To recall the settings from the memory that you have stored, move the arrow to Reset and then press S
button. When you have reset the setongs. *OK ?* is displayed for confirmation. Move the arrow 10 Y
then press SELECT button. You can adjust the settings again if needed.
MAIN MENU DISPLAY
PICTURE IMAGE ADJUSTMENT (COMPUTER MODE)
TABLE OF PICTURE IMAGE ADJUSTMENT
FINE SYNC Adjust the picture as necessary to eliminate flicker from the display. 0 1 ;
TOTAL DOTS
The number of the total dots m one horizontal period. Adjust the number to match
your PC image.
WHITE BALANCE
(RED/BLUE)
DECREASE 0 ^ 63 INCREASE
CONTRAST LIGHTER 0 63 DEEPER
BRIGHTNESS DARKER 0 63 BRIGHTER
— 34 .