Room light, Ventilation, Setting-up the projector – Ask Proxima DP5950 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

c
SETTING-UP THE PROJECTOR
POSITIONING:
This projector is basically designed to project on a flat projection surface.
This projector can be focused from 4.6’ (1.4 m) - 35.4’ (10.8 m).
Use the illustration below as an example when positioning the projector to the screen.
ROOM LIGHT
300”
Screen Size
30”
60"
100"
150”
200"
250"
300”
(W X H) inch
24 X 18
48 >■ 36
80 >• 60
120x90
160 X 120
200 X 150
240 X 1
Height (Hi)
17.1 inch
34.2 inch
57 inch
85.5 inch
114 inch
142.5 inch
171 inc
Height (H2)
0.9 inch
1.8 inch
3 inch j
4.5 inch
6 inch
7.5 inch
9 inch
VENTILATION
This projector is equipped with a cooling fan to protect it from
overheating. Pay attention to the following to ensure the ventilation
and avoid a possible risk of fire and malfunction.
A
• Do not cover the vents with papers or other materials.
• Keep the rear grill at least 3.3’ (1m) away from any
object.
» Make sore that uiere are nc obiects under the proiscîor.
An object under the projector may prevent the projec&r
from taking the cooling air through the bottom vent