Ask Proxima DP5950 - Manual (Page 40)

6
. Anotier dialog box "PC ADJUSTMENT DISPLAY 1” wi!! appear and the parameter data for the Mode you hav^'
selected is shown in this dialog box.
7 . The parameters will be filled with the data determined by the projector according to the present signal input.
3. The function of the parameters and their values are summarized in the table below. f'
g Move the arrow to an item that you want to adjust by pressing the POINT UP/0OWN BUTTON(s).
1 0. To increase the level, point the arrow to A and then press the SELECT BUTTON. To decrease the level, point thg
arrow to. V and then press the SELECT BUTTON.
11 . If you want to store the settings in the memory, move the arrow to Stored and press the SELECT BUTTON. When
you have stored the settings, ”OK T is displayed for confirmation. Move the arrow to Yes and then press thg
SELECT BUTTON .
12
. To recall the parameter data before setting, move the arrow to Reset and then press the SELECT BUTTON. Whe^
you have reset the settings, "OK ?" is displayed for confirmation. Move the arrow to Yes and then press th§
SELECT BUTTON . You can adjust the settings again if needed.
13. To quit the MENU, move the arrow to Quit and then press the SELECT BUTTON.
14. If you quit the MENU without storing the settings in the memory, the parameter data you changed will not be kept.
15. The stored settings are permanently held even if the MAIN ON/OFF is switched off,
16. Adjust the data such as a "Clamp”, "Display area”, Horiz. scale" and "Vert, scale" if needed, move the arrow by
pressing the POINT UP/DOWN BUTTON(s) to select (▼). Press the SELECT BUTTON.
Video Computer 7_
■zrnll.-. □
PC ADJUSTMENT
DISPLAY 1
OK ?
Yes ) <
D No
ITEM FUNCTION !
TOTAL LINES The number of the total vertical lines. Adjust the number to match your PC image.
TOTAL DOTS The number of the total dots m one horizontal period. Adjust the number to match your PC
image.
HORIZONTAL , Adjustment of the hcrizontai picture position. When the image is not centered on the
screen, adjust this.
VERTICAL Adjustment of the vertical picture position. When the image is not centered on the screen,
adjust this. ■