Ask Proxima DP5950 - Manual (Page 28)

^Bl
Press the VOLUME buttons (located on remote control unit or on the projector) to
adjust the volume. The volume display will be displayed on the screen tor a few
seconds.
Pressing volume (+) will increase volume and increase the number on the screen.
Pressing volume (-) will decrease volume and decrease the number on the screen.
SOUND MUTE FUNCTION
Pressing the MUTE button on the remote control unit will mute audio. Press the
MUTE button again to restore audio to its previous ievel. Hie mute display will be
..—■
displayed on the screen for a few seconds.
ZOOM ADJUSTMENT
Press the ZOOM ( A. ) or ( %/ ) buttons (located on remote control unit or on the projector) to
obtain your desired picture size.
For a larger picture, press (A) and for a smaller picture, press (\у).
FOCUS ADJUSTMENT
Press the FOCUS ( A ) or (\/ ) buttons (iccated on remote control unit or on the projector) for a
sharper, crisper picture.
DIGITAL ZOOM FUNCTtON
Press the D. ZOOM button on the remote control unit. The message “Quif is displayed to
indicate Digital Zoom mode. Digital zoom mode can be adjust the image size or pan the image.
To expand the image size, press SELECT (LEFT CLICK) button. The image is magnified by
degrees (Expand function).
To compress the image size, press RIGHT CLICK button. The size of image is reduced by
degrees {Compress function).
To pan the image, press POINT UP/DOWN/LEFT/RIGHT (JOYSTICK) button(s). The image
move to the direction indicated (panning function).
To cancel Digital Zoom mode, press other buttons (except BLANK button).
NORMAL PICTURE FUNCTION
The normai picture ievel is factory preset on the projector and can be restored anytime by
pressing the NORMAL button on the remote control unit The "Normal" display will be displayed
on the screen for a few seconds.
SOUND VOLUME ADJUSTMENT
-•Tit
Volume
О
-Focui
Quit
Norm«
No she
B|
00:0
NO SHOW FUNCTION
Press the BLANK button on the remote control unit. The screen will change into black image and
the "NO SHOW” is displayed on the screen for a few seconds.
This function is cancelled when the BLANK button is pressed again or any other function button
------is-oressed, __________ ____ ____________ _
P-TIMER FUNCTION
Press the P-TiMER button on the remote control unit The timer display "00:00" appears on the
screen and the timer starts to count the time (00:00 to 59:59).
Press again the P-TiMER button to stop the timer. Then press the P-TIMER button to cancel the
P-TIMER function. ...... ..............
FREEZE PICTURE FUNCTION
Press the FREEZE button on the remote control unit, and the picture will remain on-screen. This function is can^
when the FREEZE button is pressed again or any other function button is pressed.
NOTE: Your computer or video equipment is not affected by this function, and will continue to run.
AUTO IMAGE FUNCTION
Press the AUTO IMAGE button, on the remote control unit or on the projector. The liem(s) indicated "ON" in the f
IMAGE FUNCTION are adjusted automaticaily.
if all the imms ir: AUTO i«f.4GE FUNCTION are "OFP, AUTO IMAGE SETTING display appears, if you wish to op
the AUTO IMAGE FUNCTION, perform the steps 3 - 9 of "AUTaiMAQE FUNCTiON” seotion on page 3S.