Ask Proxima DP5950 - Manual (Page 39)

iaioq
>WN
)ove
lyed
in if
-igs
the
'es
PCADJUSIMENT
This projector can automatically detect most display signals from most personal computers currently distributee
some computers employ a special signal format which is different from the standard one and may not i><
(jetected by this projector. If this happens, the projector cannot reproduce a proper image, instead the image is oftei
recognized as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture.
por those non-standard formats, this projector is provided with PC ADJUST, enabling you to precisely adjust severa
narameters to match with the input signal format. The projector has eight independent memory areas where you car
store the parameter you have set. This enables you to recall the setting for a specific computer when you need it.
1 Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.
2 _ Press the POINT LEFT/'RIGHT BUTTON(s) to select PC ADJUST and press the SELECT BUTTON. Anothei
dialog box " Where to reserve” will appear.
3 . in this dialog box, you will select one of the memory areas from among "Mode 1" to "Mode 8 ”. If parameters have
been previously set and stored in the memory, the status "Stored" wifi appear on the corresponding row. If not,
"Free" wii! appear.
Press the POINT DOWN BUTTON and a red arrow will appear.
5 , Move the arrow to one of the "Modes" (Free position) where you want to store the parameters by pressing the
POINT UP/DOWN BUTTON(s). Press the SELECT BUTTON to select it
NOTE; If "Stored" appears in all Modes, no new PC parameter data can be stored. In this case, clear the PC
parameter data using the Mode free Function.
MAIN MENU DISPLAY
' ( English
I
' ^.
ty........... .............................O: ■
..
i'Mo'de'S'^ rree rY ►
-Mode- 6 ?| Free - >
Free StS
L
•
39
—