Computer systeiyt select {computer mope) – Ask Proxima DP5950 User Manual

Page 34

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

COMPUTER SYSTEiyt SELECT {COMPUTER MOPE)

This projector is adjustable to different types of computer display signals based on VGA. SVGA or XGA (Si

"COMPATIBLE COMPUTER SPECIFICATIONS” on the next page). If you set MODE SELECT to "COMPUTER". tJ
projector will automatically process the incoming signal and project the proper image without any special setBn

Although this will work in most cases, you may be required to manually set the projector for some computer signals.
the computer image is not reproduced properly, try the foiiowir?g procedure and switch to the computer display moc

that you want to use.

. Connect the COMPUTER to the PROJECTOR, and turn them on projector first.

2. Set MODE SELECT to "COMPUTER MODE (1 or 2)". This shows the current display mode initially detected by th

projector in the system window. And "Current mode” display appears.

NOTE:

. If the projector cannot discriminate or detect the input signal from the computer, the "Go PC adj." displa

appears,

NOTE: 2. If no input signal from the computer, the "No signal" display appears on the screen,

3. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.
4. Press the POINT LEFT/RIGHT BUTTON(s) to select SYSTEM and press the SELECT BUTTON. Another dialoc

box COMPUTER SYSTEM DISPLAY will appear.

5. Press the POINT DOWN BUTTON and a red arrow will appear.

. If you want to change the current display mode, move the arrow by pressing the POINT UP/DOWN BUTTON(s)

select one of the modes.

7. Press the SELECT BUTTON to change the display mode.

. To quit the MENU, move the arrow to Quit and then press the SELECT BUTTON.

МАШ MENU DISPLAY

Video

4^-

COMPUTER
SYSTEM:
DISPLAY

CURRENT

MODE

DISPLAY

Clirrefttmode

H-Syncfreq,

[ 36S j

V-Sync freq.

f ed.o |

VGA

VGA1

VGA2
VGA3
VGA4

" О

]

( Quit

) =

English

When the mark {O ) is displayed as BLACK,
computer system mode will be available on the
next page. Move an arrow to the mark (-Gi- )

and press the SELECT BUTTON to show
computer system mode described on the next
page.

PC ADJUSTMENT

This is a special function that may be used when a computer image is not reproduced properly. (See the pages 39 -
42 for more detail.)