Ask Proxima DP5950 - Manual (Page 44)

OTHER FUNCTION SETTING
This projector has other function settings; Blue back, Display, Ceiling, Rear, Split wipe and Lamp age.
BLUE BACK f
When this function is in the ”On” position, the projector will project a blue image without video noise on the ь.
when the video source is unplugged or turned off.
DiSPLAY
When this function is in the ”On" position, on-screen displays always appear when adjustments are made. Alth
these on-screen displays are very helpful, these may spoil the view If adjustments are made during presentation
avoid this, you can keep back certain displays by switching this function "Off”. The followings are the displays
you can hide.
• Wait Display
• Mode Display
• Volume Display
• Mute Display
• Zoom/Tocus Display
• Normal Display
• No show Display
CEILING
When this function is in the "On” position, the top/bottom
and the ieft/right picture reverse capabiiity lets you project
from a ceiling-mounted projector.
T/B
.. ___________ _
a/1
REAR
When this function is in the "On” position, the Ieft/right
picture reverse capability lets you project onto a rear
projection screen.
--\ч
Z' 4z%. ;
, L/'R . R\J
SPLIT WIPE
Turn SPLIT WIPE function On in the SETTING menu. The picture will change into next one by sliding black imi
side ways when the input source is changed.
Change the input source by MODE button. The picture is replaced by black image from side ways to the center, i
the next one appears from the center to side ways like drawing the black curtains.
LAMP AGE
The Lamp age function is designed to reset the lamp replacement monitor timer. When replacing the lamp, reset ‘
lamp replacement monitor timer by using this function.