Ask Proxima DP5950 - Manual (Page 41)

Che
eri
he
sn
Ne
17.
18,
19.
20
.
21
-
22
-
23.
24.
Aftcjihef dialog box "PC ADJUSTMENT DISPLAY 2" wifi appear and ttie parameter data for the Mode you have
«elected is shown in this dialog box.
Move the arrow to an item that you want to adfuM by pressing tie POtffi UP/IX)\¥N BUTTONfs).
To increase the level, point the arrow to A and then press the SELECT BUTTON. To decrease the level, point the
arrow to V and then press the SELECT BUTTON.
If you want to store the settings in the memory, move the arrow to Stored and press the SELECT BUTTON. When
y have stored the settings, ”OK ?” is displayed for confirmation. Move the arrow to Yes and then press the
SELECT BUTTON.
To recall the parameter data before setting, move the arrow to Reset and then press the SELECT BUTTON. When
you have reset the settings. "OK ?” is displayed for confirmation. Move the arrow to Yes and then press the
SELECT BUTTON . You can adjust the settings again if needed.
To quit the MENU, move the arrow to Quit and then press the SELECT BUTTON.
if you quit the MENU without storing the settings in the memory, ttie parameter data you chariged will not be kept
The stored settings are permanently held even if the MAIN ON/OFF is switched off.
Dy
“DISPLAY AREA
Adjust the display area, move the arrow
bv pressing the POINT UP/DOWN
BUTTON is) to select {► ) and press the
-SELECT BUTTON,
Another dialog box
DISPLAY" will appear.
Move the arrow to an item that you want
to select display area by pressing the
POINT UP/OOWN BUTTONfs) and press
the SELECT BUTTON.
Selected mode data will be displayed in
H.V box.
To close dialog, move the arrow to "Quit"
and press the SELECT BUTTON.
fWO X 480
W20 X 400
!800 X 600
-1tJ24 X 768,
cih52 X 864
1280 X 1024 1.
( Quit
■‘D.spaya^-a ► 4-
_ 64C .
Herr:, sea o -w
. ... '' ''■■■■ . SiJk.,
Vnrf sca=9 ■
■ ■ Cusaigeg:
y— 0 ». r
ITEM FUNCTION
CLAMP Adjustment of the clamp level. When the image has a dark bar, try this adjustment
DISPLAY AREA Adjustment the display area to match your PC. |
HORIZ. SCALE Expanding or compressing level for the horizonia! direction.
VERT. SCALE Expanding or compressing level for the vertical direction.
- 4 1