Ask Proxima DP5950 - Manual (Page 27)

c
USING THE PROJECTOR
art the projector to a source (Computer, VCR, Video Camera, Video Disc Player, etc.) using the appropriate
termS on the rear of the projector {See "CONNECTING THE PROJECTOR" section on pages 10-17).
ort the projector’s AC power cord into a wall outlet and turn the MAIN ON/OFF switch (located on the rear of the
pr^Sr) to the ON position. The LAMP POWER indicator will light RED. the READY indicator will light GREEN.
the LAMP POWER ON/OFF button on the remote control unit or on the
to ON, The LAMP POWER indicator tight will dim and the cooling fans will
The wait display appears on the screen and the count-down starts
° 2(5 19 - 18 - ..1)- The signal from the source appears after 30 seconds.
A
CAUTION:
THIS PROJECTOR USES A SID LAMP. TO EXTEND THE UFE OF THE LAMP, ONCE YOU HAVE TURNED
rr ON, WAIT AT LEAST 5 MINUTES BEFORE TURNING IT OFF.
WOTE' TEMPERATURE WARNING INDICATOR flashes red, the projector will automaticafiy turn off.
”
" Wait at least 5 minutes before turning the projector on.
If the TEMPERATURE WARNING INDICATOR continues to flash, follow the procedures below:
(
1
) . Press LAMP POWER ON/OFF button to OFF.
(2) ' Check the air filter for dust accumulation.
(
3 ) . Remove dust with vacuum cleaner (See "AIR FILTER CARE AND CLEANING” section on page 47.)
( 4 ) . Press LAMP POWER ON/OFF button to ON.
Î
If the TEMPERATURE WARNING INDICATOR still continues to flash, call your authorized dealer or service
station.
TO TURN OFF THE PROJECTOR
Press the LAMP POWER ON/OFF button on the remote control unit or on the
oroiector. The "Power off ?” appears on the screen. Press again the LAMP POWER
ON/OFF button to turn OFF the projector. The LAMP POWER indicator will light bright
and READY- indicator will turn off. The cooling fans will operate for 1 minute alter the
orcsector is turned off. (During this "cooling down" period, the projector cannot be
turned on,I The READY indicator will light green again and the projector may be turned
on by pressing the LAMP POWER ON/OFF button. To power down completely, turn
!ne MAIN ON/OFF switch (located on the rear of the projector) to the OFF position.
Power off:?:
DIRECT OPERATION
MODE SELECT (Top control)
Press the COMPUTER button located on the projector to select Computer 1 or , - -
Computer 2 Input. The "Computer 1” or "Computer 2" display will appear on the
screen for a few seconds.
Press the VÍDEO button located on the projector to select Vdeo 1 or Video 2 input
-
I ne 'Video 1 ’’ or "Video 2" display will appear on the screen for a few seconds. ¿TYideo 1
MODE SELECT
(Remote control unit)
MODE button located on the remote control unit to seieci Computer 1 ,
^-c.Mpwisr 2. Videori or Video 2 input. The "Computer 1 ”, "Computer 2 ", "Video T or a ■
^ Video 2 display will appear on the screen for a few seconds.
f'Video 2'
-SCorri'pbtsr.
• V VidOT 1
— 2 7 -