Ask Proxima DP5950 - Manual (Page 47)

b,
CT
AIR FILTER CARE AND CLEANING ___________
uabte air filter prevents dust from accumulating on the surface of the projection lens and projection mirror.
=i air filter become dogged with dust particles, It will reduce the cooling fan’s effectiveness and may result in
uid jjyjid up and reduce the life of the projector.
’ . air filter, follow the cleaning procedures below:
TO clean s« pQWER ON/OFF button OFF.
cover.
2
Flemov
3 . air filter with a vacuum cleaner.
¿ _ .ug air filter. Make sure that air iter cover is fulfy inserted.
Replace i.i
AIR FILTER
COVER
po not clean with water. Doing so may damage the air filter.
Do not operate the projector with air filter removed.
A
BECOMWEN0ATION
n enjoy picture image , use the projector m
WF CLEAN
ENVIRONMENT. USAGE IN THE CLEAN
¡MVIBONMENT IS RECOMMENDED.
yged under the dusty or smoky conditions, dust may
^^i-umulate on the liquid crystal panel and lens inside it, and may
rsultantly bo projected on the screen together with the picture,
vvnen the above symptoms are noticed contact the place where your
r^utno'n^ed dealer or service station for the cleaning.
)
I
AIR FILTER
AIR FILTER
COVER
C TEMPERATURE WARNING INDICATOR
me TE?«^PERATURE WARNING INDICATOR flashes red when the interna!
■emoerature of the projector exceeds the norma! temperature.
Possible causes for the temperature warning may be;
■ Ventilation slots of the projector are blocked, in such an event, reposition the
projector so that ventilation slots are not obstructed.
2 A)f filter is dogged with dust particles. Remove dust from the air filter by
ioitomng instructions in the Air Fitter Care and Cleaning section above.
3 H lernoerature warning indicator remains on after performing the checks
iisted aDove, cooling fan/iniernal circuits may be malfunctioning. Request
service from an authorized dealer or service station.
TEMPERATURE
WARNING
INDICATOR
- 4 7 -