Ask Proxima DP5950 User Manual
Page 46
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
LAMP AGE
NOTE: Do not reset the LAMP REPLACEMENT MONITOR TIMER, except after the lamp is replaced.
1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.
■
2. Press the POINT LEFT/RIGHT BUTTON (s) to select SETTING and press the SELECT BUTTON. Another diaic^
box SETTING DISPLAY will appear.
3. Press the POINT DOWN BUTTON and a red arrow will appear.
4. Move the arrow by pressing the POINT UP/DOWN BUTTON(s) to select Lamp age and then press the SELECT
BUTTON. When you reset the lamp replace monitor. Tamp replace monitor reset?” is displayed for confirmation.
5. Move the arrow to Yes and then press the SELECT BUTTON, “OK?" is displayed for confirmation. Move the arrow
to Yes and then press the SELECT BUTTON, the tamp replace monitor is reset.
6
. Move the arrow to No and then press the SELECT BUTTON. The lamp replace monitor is not reset.
7. To quit the MENU, move the arrow to Quit and then press the SELECT BUTTON.
■ Vid^
: Computer^'-
MAIN MENU DISPLAY
7™...........
' VGA i "II
SETTING
DISPLAY
D-
M
Off «
|©y, fea- r _ > '
______
■
f r - - ~
O K ?
r ~ ...N c i ..
Lairc replace monitor
Reset ?
(
Yes -
)*
r No