Network, Local file, Other scanners – Xerox 423 User Manual
Page 51: Network -5 local file -5, Other scanners -5, Changing display of the scanner name
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Changing Display of the Scanner Name
&
o
O
"co
c
o
2
s
-Hi
c
■Hi
o
0)
£
Co
,c
'A
5
0)
o'
You can change the way to display the scanner name on the dialog
box.
Click Change Display on the scanner selection dialog box to specify
the scanner name. Selectthe required scanner forwhich the name is
to be changed by following the procedure.
Network
If you select Network, the machine will search for the scanner name in
the HOSTS file in \WINDOWS\HOSTS file forWindows 95/Windows
98/Windows Me and in \WINNT\SYSTEM32\DRIVERS\ETC\HOSTS
file for Windows NT 4.0/Windows 2000.
If the network scanner is not registered for each of the HOSTS file, the
name registered in the DNS server on the network is displayed.
If the network scanner is not registered in the DNS server or if the DNS
is not in use, the model name and the IP address are displayed.
Local File
Display the scanner name registered in the HOSTS file format in the
specified file. Display the model name and the IP address will be
displayed if the network scanner is not yet registered in the specified
file or if there are no specified files. Forexample:
13.220.172.75 scanner
Other Scanners
Display scanner names existing in other networks. Since scanners can
only be identified and displayed automatically in the same network,
enterthe IP address and scanner name here forscanners in other
networks. However, if communication is not succcessful with the added
scanners when using TCP/IP, they cannot be used.
NOTE: You should set up the scanner and make sure that it can be
used in TCP/IP environment if the scanner is already connected to
other network.
XEROX WorkCentre Pro 423/428 Scanner User Guide
Page 4-5