Xerox 423 User Manual
Page 49
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4. Click the command to import the scanned data.
The screen example as shown on the right is PaperPort. The
command name for selecting the scanner (source) differs
depending on the software.
5. Click the scanner name of the WorkCentre Pro on the dialog box
as shown below, then Select Scanner.
&
o
O
"co
c
o
2
s
-Hi
c
■Hi
o
0)
£
Co
,c
'A
5
0)
o'
NOTE: You can change the way of displaying scanner names by
clicking the Change Display button.
When the WorkCentre Pro 423/428 is connected to the same network
as your computer, the scanner names are displayed automatically. If
you want to change to a scanner in another network, click Change
Display, then enterthe IP address and scanner name (product name).
See “Changing Display ofthe Scanner Name” on page 4-5 for
changing the scanner name, or connecting to other network.
6.
Enter the mailbox number that stores the scanned document (1 to
200) and a 4-digit password for the mailbox (four digits), then click
Open Mailbox.
XEROX WorkCentre Pro 423/428 Scanner User Guide
Page 4-3