Scanning documents, Procedure, Scanning documents -2 – Xerox 423 User Manual
Page 30: Procedure -2, Scan-to-mailbox
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Scanning Documents
This section describes how to scan documents and store the scanned
document into the mailbox.
There are two methods forscanning documents.
> Store the scanned data into the mailbox.
Scan-to-Mailbox
> Specify the job template and scan the data, then transmit to server.
(when using the CentreWare Scanning Services)
Refer to the corresponding steps according to your selection.
The basic procedure to scan documents and store them in a mailbox is
as follows:
Procedure
1. Loaddocuments.
2. Select Scan on the Menu screen.
NOTE: If the Menu screen is notdisplayed, press Feature Selection
on the control panel a few times.
See “Enabling the Salutation” on page 2-8 to check the settings if the
Scan button is not displayed.
Page 3-2
XEROX WorkCentre Pro 423/428 Scanner User Guide