Xerox 423 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3. Select Job Template.
Select Job Template to scan images.
Fax Memory 100%
See “Enabling the FTP Client” on page 2-14 to confirm the setting
if the Job Template button is notdisplayed.
NOTE: If the Salutation is running, the display differs from the figure
as shown on the right.
4. Selectthe required job template directly. If the job template that you
created is not displayed, select Update Template.
NOTE: When the Template Description button is selected during
selection of any job template, detailed description is displayed.
However, if you have not added any description when the job template
was first created, there will be no display.
When the Review button on the control panel is pressed during
selection of any job template, you can check the contents of the
settings for each job template.
5. Press Start.
The scanning starts and the data is stored in the hard disk, which
is then automatically transmitted to the server.
NOTE: The System Administratorsets up templates.
Page 3-6
XEROX WorkCentre Pro 423/428 Scanner User Guide