Specifying various features (mailbox), Selecting the scan resolution level, Procedure – Xerox 423 User Manual
Page 35: Specifying various features (mailbox) -7, Selecting the scan resolution level -7, Procedure -7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Specifying Various Features (Mailbox)
0)
c
c
CD
Ü
00
0)
£
CD
,c
'A
5
0)
O'
This section describes the setting of various scanning features at the
machine.
The available scan features are as follows:
> Scan Resolution
> Original Type
> Lighter/Darker (density level)
> Scan Size
> Reduce/Enlarge (scan ratio)
> Mixed Size Originals
> 2-Sided Originals
Selectthe required scanning features following the procedure below.
Selecting the Scan Resolution Level
You can select the resolution level for documents to be scanned.
The resolution levels are 200 dpi (factory-default), 300 dpi, 400 dpi and
600 dpi.
Procedure
1. Display the Basic Features screen and select the required
resolution.
Scan
Resolution
Original Type
Lighter/
Dari^er
200 dpi
Text
—
A
300 dpi
Text & Photo
► I
Other Y I
Haiftone
T
Basic Features
Customised
Features
z
Features Menu
NOTE: You can also select Scan Resolution on the Features Menu
screen.
If you want to select 400 dpi or 600 dpi, select Other.
2. After selecting the resolution, select Close.
XEROX WorkCentre Pro 423/428 Scanner User Guide
Page 3-7