Preparing to use the mailbox feature, Defining the ip address, Preparing to use the mailbox feature -5 – Xerox 423 User Manual
Page 15: Defining the ip address -5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Preparing to use the Mailbox Feature
0)
c
c
CD
Ü
00
0)
£
CD
,c
0)
The following preparation is neoessary to soan a dooument using the
mailbox:
> Define IP address.
> Enable Salutation.
> Registerthe mailbox.
The prooedure forsetting up is as follows:
Defining the IP Address
This seotion explains how to set up anIP address. Depending on the
network environment, you may need to set up the subnet mask and
gateway address. If your network has a Dynamio Host Configuration
Protoool (DHCP), BOOTP or RARP environment, the printer oan obtain
these items automatioally from eaoh of the server. By default, these
items are obtained automatioally from the DHCP server.
NOTE: Use the DHCP servertogether with the Windows Internet
Name Servioe (WI NS) server at the same time. When using the WI NS
server, adjust the settings if neoessary, by seleoting the following on
the printeroontrol panel: Network/Port, followed by WINS Server, and
then the various items.
When using the BOOTP or RARP server, seleot the following on the
printeroontrol panel: Network/Port, followed by TCP/IP Settings, Get
IP Address, and then BOOTP or RARP. Cheok with your system
administrator if you have any queries on the BOOTP or RARP
environment.
In addition, you oan use the quiok setup menu to oonfigure the IP
address and Salutation along with the printer environment setting.
See the User Guide (Printer) to oheok the DHCP server and use the
quiok setup menu.
XEROX WorkCentre Pro 423/428 Scanner User Guide
Page 2-5