Trouble shooting – Ariens 929000 User Manual
Page 77
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TROUBLE SHOOTING
MODEL
TYPE OF FAILURE
CAUSE
SOLUTION
23)
Mower scalps the ground.
Cutting height too low.
Increase cutting height.
Traveling too fast for condi
tions.
Slow down.
Rollers worn excessively.
Replace worn rollers.
linkage damaged or binding.
Repair damaged linkage and
free-up any binding.
Improper mowing techniques.
Read
MOWER
OPERATION
section.
Bent blade or spindle.
Replace bent blade.
24)
Mower stalls lasily.
PTO drive belt slipping.
Adjust belt. Replace if worn
beyond adjustment.
Mower
drive
belt
or
outer
blade drive belt slipping.
Replace worn belt.
Engine speed too slow.
Operate engine at full throttle
and control ground speed with
hydrostatic
control
lever
or
select a lower gear on gear
shift models.
Travel speed too fast.
Slow down.
)
Blades dull.
Sharpen blades.
f ■ ■■
Incorrect blade pitch.
Adjust level and pitch so front
of blades Is lower than rear of
blades.
25)
Tractor wheels digging up the
lawn.
Turning too fast and too short.
Decrease travel speed when
turning.
Tires over-inflated.
Adjust tire pressure.
i
PAGE 77