beautypg.com

Trouble shooting – Ariens 929000 User Manual

Page 75

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

TROUBLE SHOOTING

MODEL

TYPE OF FAILURE

CAUSE

SOLUTION

10)

Tractor

will

not

move

with

engine running.

Free-wheeling valve open.

Transmission oil level low.

Close free-wheeling valve.

Add transmission oil to proper

level and bleed air from the

system.

Hydrostatic control linkage out

of adjustment.

Adjust hydrostatic control link­

age.

Drive belt loose or damaged.

Tighten or replace belt as re­

quired.

Hydrostatic

transmission

overheating.

Fan on backwards — See page

61 for proper Installation.

11)

Tractor creeps with hydrostatic

control lever In neutral.

Hydrostatic control linkage out

of adjustment.

Adjust hydrostatic control link­

age.

12)

Hydrostatic control linkage will

not stay In adjustment.

Improper

operation

at­

tempting to move hydrostatic

control lever with neutralizer

pedal depressed.

Use

neutralizer

pedal

for

emergency stops only. Keep

foot off the pedal during nor­

mal operation.

13)

Improper steering.

Tires improperly inflated.

Inflate tires as recommended.

Hard steering.

Lubricate

properly

check

and adjust toe-in.

Excessive steering wheel play.

Replace worn ball joint as­

semblies.

Tighten

steering

gears.

14)

Excessive front tire wear.

Bent

or

damaged

spindles,

tie rod or drag link.

Replace damaged parts.

Linkage out of adjustment.

Adjust linkage.

15)

Tractor moves too slow or not

at all.

Drive belts loose dr damaged.

Tighten or replace belts as

required.

16)

Cannot shift gears.

Shift

lever

mal-adjusted.

Clutch needs adjustment.

Adjust clutch as recommend­

ed.

17)

Hard to shift gears or gears

ciasn.

Clutch needs adjustment.

Improper operation of clutch-

brake pedal.

Adjust clutch as required.

See OPERATION section of

manual.

Shifting while In motion.

Do not shift gears with tractor

in motion. See OPERATION

section.

18)

Mower blades do not turn with

implement power clutch un­

engaged.

PTO drive belt loose or dam­

aged.

Tighten loose belt or replace if

damaged or stretched beyond

adjustment.

Mower

drive

belt

or

outer

drive belt broken or stretched

beyond adjustment.

Replace belt.

I

I

PAGE 75