How to replace the stationary knife – SINGER 14SH654 Finishing Touch (LED) User Manual
Page 90
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How to Replace the Stationary Knife
A
Danger:
■
\
Before
replacing
the
stationary
knife,
disconnect power line plug from the wall
receptacle.
• The stationary knife should be changed when it
becomes dull.
• The stationary knife can be replaced according to
the directions provided, however if there are any
difficulties
experienced,
consult
your
Singer
representative to make the adjustments.
• Be sure that the power line plug is disconnected
from the electric source.
• Open the looper cover and set the movable upper
knife 1 in the nonworking position (page 53).
• Loosen the stationary knife set screw 2 and remove
the stationary knife 3 .
• Place a new stationary knife in the groove of the
stationary knife holder.
• Tighten stationary knife set screw 2.
• Return the movable upper knife 1 to its working
position.
89