SINGER 14SH654 Finishing Touch (LED) - Manual (Page 78)

Forflatlock lace insertion,line up edges of labnic &
lace wrong sides together.position fabric so seam
is sewn with stitch on right is extending off of fabric,
pull on opposite sides of seam to pull stitches flat.
(3) Decorative Flatlocking
Place the movable upper knife in the nonworking
position (page 53). The fabric is not trimmed on
this stitch.
Fold fabric wrong sides together.
Position the fabric so the seam is sewn with part of
the stitch extending off the fabric.
Pull on opposite sides of the stitch to flatten.
For fringed hem fold up the fabric the depth of the
fringe wrong sides togethenset machine for decorative
flatlock & stitch along fold of fabric pull on opposite
sides of the stitch to flatten, cut fabric up to stitches
every 3 inches & then remove threads row by row to
create fringe.
(4) Additional Information About Flatlocking •
• The tensions must be correctly adjusted for the
fabric to pull flat.
• The upper looper thread is the prominent thread in
the flatlock stitch. Place a decorative thread in the
upper looper and inconspicuous threads in the
lower looper and needle.
• For a ladder stitch, sew seam with right sides
together. The needle thread will be the prominent
thread that creates the ladder (A).
X
Endroit
77