Raising the bobbii – SINGER 3150 User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Raising the Bobbii
Now that you have wound the bobbin and
threaded the needle, you will need to raise the
bobbin thread through the hole In the needle
plate.
1.
Hold needle thread lightly with left hand
and turn hand vyheel slowly toward you so
that needle enters needle plate.
2.
Continue turning hand wheel and holding
needle thread until needle rises and brings
up bobbin thread in a loop.
3. Undo the loop with your fingers.
4. Place both needle and bobbin threads under
the presser foot and lay them diagonally to
the right.
29