Procedure – SINGER 9614 User Manual
Page 69
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The twin-needle simultaneously produces two
parallel, closely spaced lines of pattern
stitching. You can stitch with either one or two
colours of thread.
•
• Pattern Group Selector: Stitch desired
T rVI T
• Needle Position:
only
• Stitch Width: 2.5 - 3 onlyA
3 Stitch Length: .5 - 4 to suit fabric
3 General Purpose Needle Plate
• General Purpose Foot or Special Purpose Foot
Procedure
• Insert twin-needle.
• Thread as for single-needle stitching, and
through right eye of needle.
• Attach detachable spool pin, with felt.
• Place spool of thread on detachable spool
pin and thread machine in usual way.
• Thread through remaining points, making
certain to omit the thread guide above the
needle and pass thread through left eye of
needle.
A
CAUTION: Do not use a stitch width greater than what is recommended. A wider stitch result in
needle breakage.
67