Button sewing, Mymg, Imcier – SINGER 2210 Athena User Manual
Page 44
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
button Sewing
2
® To sev/ on buttons, first attcich the but
ton sewing foot (1) to the machine by
following instructions under “Replacing
Screw-on Presser FeeP' in Chapter 2.
• Attach feed cover (2) on the machine also
as indicated in Chapter 2.
• Select
mymg
stitch.
• Press the stitch width fine tuning button
(3).
• With the garment in place under the foot,
place button under the foot. Guide the
needle into the lefthand hole and turn the
handwheel and make the first stitch.
When the needle comes out of the but-
ton, adjust the v/idth fine tuning control
so needle will accurately enter the right
hand hole.
*
The speed controller may then be
depressed and the machine allowed to
take about six stitches.
* For 4 hole button, rotate garment and
repeat.
• Remove work from machine and he off
both threads on the
imcier
side of the
fabric to secure button.
42